Product Description
The CARDONE 21-5930 Remanufactured Power Steering Pump is designed to meet or exceed original equipment performance standards, restoring smooth and consistent steering assist. Every OE pump design undergoes a rigorous review process, allowing CARDONE engineers to identify weak points and implement durability-enhancing upgrades.
All critical internal components—including campacs and spool valves—are triple-tested to ensure dependable, long-term function. Each pump is assembled using 100% new O-rings and premium-grade HNBR seals, which resist heat-related breakdown and prevent leaks better than standard sealing materials. Precision-ground shafts eliminate premature wear, extending the life of the pump.
Every unit must pass a complete hydraulic efficiency test, confirming proper pressure output, bypass function, fluid flow, valve operation, steering effort, and noise characteristics. As a remanufactured OE component, it ensures perfect fitment and easy installation.
CARDONE’s environmentally responsible remanufacturing process reduces energy and raw material use by up to 80%, making it a more sustainable alternative to new parts.
Key Features
-
Triple-tested internal components, including campacs and spool valves, for maximum reliability
-
Built with 100% new O-rings and premium HNBR seals for superior high-temperature resistance
-
Precision-machined shafts reduce early seal wear and extend pump service life
-
Fully tested and calibrated pressure relief valves ensure proper hydraulic response
-
Computer-tested for pressure, bypass function, flow, steering effort, and noise output
-
OE remanufactured for direct, trouble-free fitment
-
Environmentally friendly remanufacturing reduces waste and conserves resources
Technical Specifications
| Specification |
Detail |
| Filter Included |
No |
| Hose Port Type |
Seat |
| Housing Material |
Cast Iron/Aluminum |
| Inlet Attachment Type |
Barb |
| Inlet Diameter |
0.573 IN (14.5542 MM) |
| Inlet Quantity |
1 |
| Mounting Hardware Included |
No |
| Outlet Attachment Type |
Threaded |
| Outlet Quantity |
1 |
| Outlet Thread Size |
16x1.5 |
| Pulley Attachment Type |
Bolt-On |
| Pulley Belt Type |
Serpentine |
| Pulley Included |
No |
| Remote Reservoir |
No |
| Reservoir Included |
No |
| Reservoir Cap Included |
No |
| Shaft Type |
Splined |
| Type |
Hydraulic |
OE Cross References
Toyota:
4432004020, 4432004041, 4432004042, 4432004043, 443200W010,
4432034030, 4432034031, 4432035480
Vehicle Compatibility
| Year Range |
Make |
Model |
Engine |
Notes |
| 1994–1998 |
Toyota |
T100 |
2.7L |
Reservoir Not Included; Use OE Fluid; Install Filter; Flush System; In-Line Filter Available |
| 1997 |
Toyota |
Tacoma |
2.4L |
Before 01/1997; 4WD; Reservoir Not Included; Use OE Fluid; Install Filter; Flush System |
| 2001 |
Toyota |
Tacoma |
2.4L |
Before 09/2001; Reservoir Not Included; Use OE Fluid; Install Filter; Flush System |
| 1995–1996, 1998–2000 |
Toyota |
Tacoma |
2.4L |
Reservoir Not Included; Use OE Fluid; Install Filter; Flush System |
| 1997 |
Toyota |
Tacoma |
2.4L |
RWD; Reservoir Not Included; Use OE Fluid; Install Filter; Flush System |
| 1997 |
Toyota |
Tacoma |
2.7L |
Before 01/1997; 4WD; Reservoir Not Included; Use OE Fluid; Install Filter; Flush System |
| 1995–1996 |
Toyota |
Tacoma |
2.7L |
Reservoir Not Included; Use OE Fluid; Install Filter; Flush System |
| 1997 |
Toyota |
Tacoma |
2.7L |
RWD; Reservoir Not Included; Use OE Fluid; Install Filter; Flush System |
Installation & Warranty Notes
-
Use only OE-approved power steering fluid to prevent noise, performance issues, or pump failure
-
A full steering system flush is recommended before installation
-
Install an in-line power steering filter for warranty compliance and pump protection
-
Inspect hoses, hard lines, and reservoir for debris or deterioration prior to installation
-
Do not reuse old or contaminated fluid
