Product Description
The CARDONE 22-234 Remanufactured Rack & Pinion Assembly is precision-engineered and tested to meet or exceed Original Equipment (O.E.) standards. Each unit undergoes a comprehensive remanufacturing process where all wear components are replaced with 100% new O.E.-style seals, O-rings, and bearings to ensure smooth, leak-free performance and long service life.
A protective coating is applied to defend against corrosion, and each unit is hydraulically and functionally tested to confirm consistent flow, pressure, and steering response. CARDONE’s advanced remanufacturing process offers a cost-effective, eco-conscious alternative that reduces material and energy use by up to 80% compared to new manufacturing.
Key Features and Benefits
-
100% new O.E.-style seals and O-rings ensure leak-free, reliable operation.
-
Protective coating provides enhanced corrosion resistance and durability.
-
Racks are machined to precise tolerances to prevent internal leakage.
-
Fully hydraulic-tested for proper flow and steering performance.
-
Direct-fit replacement ensures original steering feel and factory alignment.
-
Eco-friendly remanufacturing reduces waste and resource use by up to 80%.
Technical Specifications
| Specification |
Detail |
| Type |
Hydraulic |
| Total Turns (Lock-to-Lock) |
3.5 |
| End-to-End Length |
44.75 in / 1136.65 mm |
| Bellows Color |
Black |
| Input Shaft Type |
Grooved |
| Steering Input Shaft Diameter |
0.727 in / 18.46 mm |
| Inlet Line Fitting |
0.459 in / 11.66 mm, Male |
| Outlet Line Fitting |
0.459 in / 11.66 mm, Male |
| Gasket / Seal Included |
Yes |
| Inner Tie Rods Included |
Yes |
| Outer Tie Rods Included |
No |
| Mounting Hole Quantity |
2 |
| Mounting Brackets |
Not Included |
| Mounting Hardware |
Included |
| Grade Type |
Regular |
OE Cross-Reference Numbers
Ford: 1L5Z3280AA, F57Z3280AA, F87Z3504HBRM, F87Z3504HCRM, F87Z3504JARM, F87Z3504JBRM, F87Z3504JCRM, F87Z3L547DA, F87Z3L547EA, F8TZ3504HBRM
Mercury: F57Z3280AA, F87Z3504HCRM
Mazda: ZZP232110, ZZP732110, ZZP732110A
Vehicle Fitment
Includes Inner Tie Rods | Hydraulic Power Steering
Installation Note:
For warranty coverage, always install a steering filter, flush the power steering system, and use the recommended OE fluid.
| Year |
Make |
Model |
Engine |
Qualifier / Notes |
Body / Doors |
| 1998 |
Ford |
Explorer |
4.0L |
With Hydraulic Power |
4-Door |
| 1999–2001 |
Ford |
Explorer |
4.0L |
With Hydraulic Power, Left Hand Drive |
4-Door |
| 1998 |
Ford |
Explorer |
5.0L |
With Hydraulic Power |
4-Door |
| 1999–2001 |
Ford |
Explorer |
5.0L |
With Hydraulic Power, Left Hand Drive |
4-Door |
| 2001 |
Ford |
Explorer Sport Trac |
4.0L |
Before 04/01/2001, With Hydraulic Power |
— |
| 1998–2000 |
Ford |
Ranger |
2.5L |
With Hydraulic Power |
Extended Cab Pickup |
| 1998–2000 |
Ford |
Ranger |
3.0L |
With Hydraulic Power |
Extended Cab Pickup |
| 1998–2000 |
Ford |
Ranger |
4.0L |
With Hydraulic Power |
Extended Cab Pickup |
| 1998–2000 |
Ford |
F-100 Ranger |
2.5L / 3.0L |
With Hydraulic Power |
Extended Cab Pickup |
| 1998–2000 |
Mazda |
B2500 |
2.5L |
With Hydraulic Power |
Extended Cab Pickup |
| 1998–2000 |
Mazda |
B3000 |
3.0L |
With Hydraulic Power |
Extended Cab Pickup |
| 1998–2000 |
Mazda |
B4000 |
4.0L |
With Hydraulic Power |
Extended Cab Pickup |
| 1998–2001 |
Mercury |
Mountaineer |
4.0L |
With Hydraulic Power |
— |
| 1998–2001 |
Mercury |
Mountaineer |
5.0L |
With Hydraulic Power |
— |
